How to Create a Zip2Go in Mastercam X9

How to Create a Zip2Go in Mastercam X9

  • With your current Mastercam file open, go to “Help” in the upper toolbar
  • Then, open “Zip2Go Utility” (Always save before starting)
image
  • Select “Configure,” then browse for a location to save the Zip2Go to (the desktop is a good place because it’s easy to locate later)
image



  • Under “File Options,” select ALL file types to be included in the Zip2Go
  • Next, select “Create Zip2Go” button
  • After files are generated, select check mark to exit Zip2Go utility
image
  • Retrieve the newly created Zip2Go from the Desktop and attach it in your email to Support@qtemfg.com so one of our skilled Applications Engineers can reach a solution for you

    • Related Articles

    • Making a Zip2go Using Mastercam for Solidworks

      This solution goes over how to make a Zip2go using Mastercam for Solidworks. The Zip2go function uses parts of Solidworks Pack and Go to zip up the Solidworks part, and then the Zip2go to zip up the associate Mastercam files, like the post processor ...

    • Getting Mastercam Downloads

      To get the next version of Mastercam, Mastercam tutorials, or any other resources Mastercam has to offer, you'll need to go to Mastercam's Website "https://www.mastercam.com/en-us/" Once there if you need Drivers or Utilities, you can go through ...

    • Moving Mastercam Folders to a New Computer

      This solution will go over moving the necessary files from an old computer to a new computer in order to exactly duplicate the old computer's Mastercam setup. Before starting, make sure Mastercam on both PCs is shut down. There are two folders we ...

    • How to Link Account to Mastercam Website

      The registration and linking process ensures that only Mastercam customers receive the benefits of Mastercam.com’s value-added content such as the Mastercam Forums and Knowledgebase. To register and link, please use the steps below: 1. Launch your ...

    • Configuring Mastercam

      In Mastercam's System Configuration different defaults and options can be set so Mastercam opens set in a preferred way. To get to Mastercam's System Configuration, go to the File tab and down to Configuration, or press "ALT" and F8 at the same time. ...