Popular Articles
XLED 250 DMX CHART
The XLED 250 Has two profiles for DMX control STANDARD (STD) and SHORT (SHRT). this can be changed from the Config (CNFG) Settings on the display port. please reference the manual for an exact profile.
Loading Enlighten Software
The first step to working with Enlighten is to load the Software and drivers for the USB to DMX interface. This can be accomplished by the simple steps below. 1. Make sure the Windows machine is on and the USB to DMX interface is NOT Connected 2. ...
Patch or Load Your Fixtures In Enlighten
Once Enlighten is installed we need to set up the show to be compatible with your lights show. By default there is a demo show loaded into Enlighten at first startup. We will need to clear this and then take the steps to load your fixtures so we can ...
Addressing Your Fixtures In Enlighten
Once all the fixtures have been loaded you must address all fixtures in the DMX chain, in this section we will describe the steps needed to address each fixture. 1. Make sure you have hooked up all the fixtures from one to the other in a DMX chain. ...
Create a Moving Look Sequence Button In Enlighten
Creating a moving look or a set of looks that play one after the other is covered in this section. This section will give instructions on how to program a sequence button to play a sequence of looks. 1. The first step we need to take when creating ...