Migration of Opmanager V12 from one server to another Server
Steps:
1)Stop ManageEngine OpManager Service
2)Go to OpManager command prompt with run as Admin and execute BackupDB.bat from OpManager\bin\backup
folder.
A backup file will be created under OpManager\backup folder ( Ex:Backup_Pgsql_Jul19_223135_12100.zip)
3)Install a fresh install of OpManager v12 of the same build to the new server
4)Copy the backup above backup file from the old server to the new server under OpManager\backup folder
5)Stop OpManager service on the new server
6)Go to OpManager command prompt with run as Admin and execute "RestoreDB.bat backupfilename with full
path " from OpManager\bin\backup folder.
Ex: RestoreDB.bat "Backup_Pgsql_Jul19_223135_12100.zip"
3)Once restored , Start OpManager service
New to ADSelfService Plus?
Related Articles
End user Monitoring in OpManager
This feature is to correlate and exhibit the data across our internal modules OpManager, NetFlow Analyzer &Firewall Analyzer from an end user perspective. Consider as Company(ABC) has 'x' number of employees. Each one will have a device with ...Not able to see Syslog information in Firewall Analyzer within Opmanager V12
Solution : OpManager V12 has 2 different Syslog servers , one for capturing specific syslog messages based on the syslog rule configured for generating alarms in OpManager and another one for Firewall module for monitoring complete syslog traffic. ...Enabling SSL using .PFX certificate in OpManager version 12
Steps to enable SSL using .Pfx certificate 1. First you need to convert the .pfx type to .truststore type. Place your .pfx certificate in \OpManager\jre\bin\ folder. To do that, open a command prompt as an Administrator and go to \OpManager\jre\bin ...Steps to Enable Telnet and RDP options in Browsers to use with Opmanager
Steps to Enable Telnet and RDP options in Browsers to use with OpManager Enabling Telnet and RDP protocols in browsers: There are some prerequisites that needs to be met based on the browsers you use to work with Remote Desktop and Telnet ...How to work with unknown devices in OpManager?
There are 2 reasons for devices to go in to "Unknown" Category in OpManager: 1)Device credentials (SNMP/WMI/CLI) are not added or discovered with wrong credentials in OpManager. 2)Credentials are correct but OpManager does not have built-in Device ...