Upgrading from Basic/Standard to Plus version

Upgrading from Basic/Standard to Plus version

If you want to use a different fast drive or your current fast drive is larger than 128GB and you'd prefer to use all of it in the FuzeDrive, you will need to use the "Remove Fast Media" function to migrate your data to the slow drive.  Note this will probably take several hours (if you've fuzed your boot drive, it will reboot first, and the system tray tool will give you occasional status updates).  Once that's complete, you can go to "Change Settings", then check the FuzeDrive and click "Modify" to and re-add the SSD or add a larger one.  If you have another large HDD, you could alternatively use cloning software, which might be faster since our software operates below the filesystem layer.

    • Related Articles

    • Understanding the 128GB SSD Limit on FuzeDrive for AMD Ryzen Version

      The AMD version of the FuzeDrive software is targeted exclusively at the AMD RyZen family of motherboards and systems. The supported SSD capacity for the basic version is limited to 128GB SSD fast tier capacity. Other OEM versions may have different ...
    • FuzeDrive/FuzionX/StoreMI v1.5+ Known Issues

      General Issues: To install, your system must be in AHCI mode.  For instructions to convert from RAID or IDE mode to AHCI, see <https://support.zoho.com/portal/enmotus/kb/articles/converting-system-from-raid-or-ide-mode-to-ahci>. Some software ...
    • Recommended Configuration for a New Windows Installation

      The simplest method to install a new copy of Windows onto a FuzeDrive is as follows: 1. Ensure that the BIOS SATA settings are set to AHCI (not RAID) and secure boot is set to off. For boot volumes > 2TB make sure your BIOS is set to boot in UEFI ...
    • System Requirements For FuzeDrive

      Is my system compatible with Enmotus FuzeDrive™? FuzeDrive installation is simple and only takes about 5 minutes.  Remember, always back up your data prior to installation of any new software.  FuzeDrive requires Windows 10, and is compatible with ...
    • Uninstalling FuzeDrive

      Background Once a disk has been converted to a FuzeDrive, the data begins to be distributed across the two different tiered storage devices. Depending how long you have been using the FuzeDrive, the data may be widely distributed (as is typical in a ...