Barcode Labels - Permanent Tamper Evidence Label (inc Clear Protective Film) - 70mm * 12mm
Barcode Label - Permanent Tamper Evidence Label (inc Clear Protective Film)
Small, thin asset labels. These low profile labels are ideal for smaller components. Being a tamper-evident material, they are single use. Once applied, they cannot be peeled and placed on other equipment. When removed, a large, red message is visible on the equipment it was applied to.
Label Properties
Standard Item Adhesive: SL2P (Permanent)
Dimensions: 70mm x 12mm
Available Colours: Red
Voiding Message: Stop
Minimum Quantity: 1000 Labels
Label Images
Further Information
Is a tamper evident laminate for labels that “voids” when removed.
Is a general permanent adhesive system which is designed for use on various surfaces.
Is designed to give fibre tear if removed soon after application. Over 24 hours the label will “bed down”.
NOTE: Quality of voiding is dependent on the quality of the surface the label is applied to.
Can be manufactured to Customer specific widths and roll lengths depending upon the label size.
It is available in film (50u) with a silicone paper (40 gsm) backing and adhesive thickness of 50 to 80 gsm.
Storage: Dry conditions (10 - 20C), kept in box out of direct sunlight
Low profile, skinny asset labels
These asset labels are designed to fit over smaller components or access points. The material is a tear resistant, PET film which is supplied with a clear over-laminate that protects against dust, moisture and wear&tear (especially on mobile units and laptops)Small, thin asset labels. These low profile labels are ideal for smaller components. Being a tamper-evident material, they are single use. Once applied, they cannot be peeled and placed on other equipment. When removed, a large, red message is visible on the equipment it was applied to.
Label Properties
Standard Item Adhesive: SL2P (Permanent)
Dimensions: 70mm x 12mm
Available Colours: Red
Voiding Message: Stop
Minimum Quantity: 1000 Labels
Label Images
Further Information
Is a tamper evident laminate for labels that “voids” when removed.
Is a general permanent adhesive system which is designed for use on various surfaces.
Is designed to give fibre tear if removed soon after application. Over 24 hours the label will “bed down”.
NOTE: Quality of voiding is dependent on the quality of the surface the label is applied to.
Can be manufactured to Customer specific widths and roll lengths depending upon the label size.
It is available in film (50u) with a silicone paper (40 gsm) backing and adhesive thickness of 50 to 80 gsm.
Storage: Dry conditions (10 - 20C), kept in box out of direct sunlight
Related Articles
AssetManager Pro OnlineAudit (inc AssetManager Pro Mobile Scan for iOS)
AssetManager Pro OnlineAudit (inc AssetManager Pro MobileScan) Asset Audits are a key part of Asset Management. Without accurate asset records, your financial balance sheets will be incorrect, losses may occur, or necessary assets may not be ...Why Barcode and Scan your Assets?
Barcode Scanning for Asset Management and Tracking Assets can range from product components to buildings to IT hardware, and enterprise companies have always had to design systems to track of these assets. There are many reasons why companies track ...Barcode Label Printing and Type Options
Barcode Label Types - Printing and Type Options Bar-coding your assets can really help to transform your asset tracking and audit process. It enables you to quickly access information about an asset and can significantly improve the accuracy of your ...Thermal Direct vs Thermal Transfer Barcode Labels
Thermal Direct vs. Thermal Transfer Barcode Labels Two different printing technologies are used by thermal label printers, Thermal Direct (Short-Term Print) and Thermal Transfer (Permanent Print). Thermal Direct Thermal direct printers use the print ...2019 v8 Update Instructions
AssetManager Pro 2019 v8 Update Installation Download the update from https://www.assetmanagerpro.com.au/2019-v8-update/ and run the file downloaded (double click the downloaded file). *Users running the software via Terminal Services on a Windows ...