AdvancePro Technologies
            Knowledge Base Knowledgebase HOW TO GUIDES WAREHOUSE

            How to: Packout ability at the packing stage


            Users can now create and assign packaging units for line-items on customer orders in the warehouse stage (picking, packing, shipping). This will allow the EDI 856 SOPI export to populate with package info.

            1. Enable EDI module using your AdvancePro keys to add the Packaging Units module. This can be found under Admin > Utilities > EDI. After you’ve enabled the EDI Module the Packaging Units button should be added on the Admin panel as shown on the figure 01.

               1.1 Enable Packaging Units for CPO  Admin > Site Settings > Additional Setting Tab >  Check boxes on PPS  > Click Save & Close as shown on the figure 02.
                                                                                                                                               Figure 01

                                                                                                                                                  Figure 02

            2. Click the Packaging Units button and enter information into the Name and Notes (optional) fields. Click Save to create a unit. You may continue to add/update/delete units as needed and click Close when finished.

            3. A Packaging Units column is added in the pick, pack and shipping stages of the warehouse. You can select from existing  packaging units from the drop-down list or enter a custom packaging unit name on this same screen as shown in Figure 3.a

            NOTE: Manually entering a unit will NOT create it in AdvancePro

            3.a Custom Packaging Unit name.

                                            Figure 3.a 

            Updated: 22 May 2019 01:24 AM
            Help us to make this article better
            0 0